GD10

GD10

Desking Done Right

Desking done right. The GD10 is a bit of a masterpiece. Made from oak and handcrafted in Bolton, GD10 keeps things simple. A design that celebrates traditional, with a range of cleverly concealed fixtures to suit modern needs. An antidote for bland design.

Product Range
Features
Downloads

Product Range

4 Leg – 751mm High

4 Leg – 751mm High

6 Leg – 751mm High

6 Leg – 751mm High

4 Leg – 1071mm High

4 Leg – 1071mm High

6 Leg – 1071mm High

6 Leg – 1071mm High

4 Leg – 751mm High with 430mm High LED Light Bar

4 Leg – 751mm High with 430mm High LED Light Bar

6 Leg – 751mm High with 430mm High LED Light Bar

6 Leg – 751mm High with 430mm High LED Light Bar

4 Leg – 1071mm High with 430mm High LED Light Bar

4 Leg – 1071mm High with 430mm High LED Light Bar

6 Leg – 1071mm High with 430mm High LED Light Bar

6 Leg – 1071mm High with 430mm High LED Light Bar

4 Leg – 751mm High with 1105mm High Canopy

4 Leg – 751mm High with 1105mm High Canopy

6 Leg – 751mm High with 1105mm High Canopy

6 Leg – 751mm High with 1105mm High Canopy

4 Leg – 1071mm High with 905mm High Canopy

4 Leg – 1071mm High with 905mm High Canopy

6 Leg – 1071mm High with  905mm High Canopy

6 Leg – 1071mm High with 905mm High Canopy

4 Leg – 450mm High Bench Seat

4 Leg – 450mm High Bench Seat

4 Leg – 450mm High Bench Seat

4 Leg – 450mm High Bench Seat

6 Leg – 450mm High Bench Seat

6 Leg – 450mm High Bench Seat

Features

Materials

GD10 tables are produced in K.D. (knock-down) form to enable it to be easily stored, transported and reconfigured on site without damage to its constituent parts.

The standard tops, end frames and rails are manufactured from engineered hardwood that are made-up from finger-jointed staves. This provides the ‘block board’ appearance. Each wooden component is cut from those panels, laminated using Polyurethane adhesive and then machined to detail. End frames incorporate traditional mortise and tenon joints for strength, whilst the skirt rails bordering the underside of the worksurfaces are mitred in the corners to improve the tables’ aesthetics. All wooden components are finished with three coats of ‘Tung Oil’ – a natural, sustainable air drying oil produced from seeds that provides an even, deep transparent coating that hardens upon exposure to air and is easily maintained.

The skirt rails and support battens pre-fitted to the worksurface are attached using ‘hi-lo construction’ screws, providing a strong, flush fix. All other elements are attached using steel, metric Allen-key headed machine screws that locate into course threaded screw-in inserts, providing a substantial metal-to-metal fix that maintains their hold even after multiple assembly / dis-assembly operations.

End and centre frames are also connected to the top panels using 6mm thick Mild Steel connector plates, used to spread the load. These are precision laser cut and have a durable epoxy powder coated finish.
 

Considerations

  • Available in a selection of lengths, widths & heights
  • Available with optional cable management
  • Available with optional LED overhead lighting
  • Available with optional, multi-functional canopies
  • Available with optional, over-desk power bars
  • Produced in K.D. form to allow assembly on site

 

LED Overhead Lighting

Anodised aluminium light encased in solid engineered hardwood frame with Polycarbonate diffuser. LEDs with 4000K colour temperature output. Units have an individual on/off rocker switch for users and are supplied with a 3 metre lead fitted with a Wieland GST connector requiring starter lead / power feed.

Leg Finishes

Oak
Left Menu Icon